Model Name
  • Model Name
  • Keyword
  • Certification

Product

IoT Solution

Filter
Type
Interface
Port Count
Approval
Power Input
Mounting
Filter
Port-count
Total 2 products matched
  • Inquire
  • Compare

TLE3-71300-5120-T

Industrial Cellular IoT Gateway

Equipped with a dual-SIM LTE module with failover function
WiFi Compliance IEEE802.11n/ac 2T2R
Multiple (8) SSIDs for privilege group devices or users
4*GE LAN port with tag based and port based VLANs
RS232/RS485 interface for Modbus RTU/ASCII and various serial communication protocol
DI/DO for device triggering or event reporting
Equipped with OPC UA server and multi-mode data logging function, which stores the collected logs on attached storage for SCADA telemetry
Embedded SPI firewall and IPS function for cyber-attack prevention
Support NAT, Routing, and IPv6
Support VPN technologies, such as IPSec, OpenVPN, PPTP and L2TP, supporting up to 16 concurrent IPSec tunnels
Support SNMP, Telnet & SSH via the CLI, and TR-069 for remote management
Seamless power failover between redundant 12V~48VDC wide range power input
1*LTE cat.4 module2 (dual SIM)
1*RJ45 GE (configurable)
4*RJ45 GE
802.11a/b/g/n/ac 2T2R (2.4G/5GHz selectable)
1*RS232/RS485 (4-pin Terminal Block)
1*DI (“Logic 0”: 0~2V, “Logic 1”: 5V~30V), 1*DO (Relay Mode, up to 30V / 1A)
1*USB 2.0
2*SMA Jack (Female) for external LTE Ant.
2*SMA Jack (M) for ext. WiFi Ant. (2.4G/5GHz)
Multiple WANs, Failover/Load Balance, Configurable Ethernet/4G
2G/3G/LTE, IP Pass-through
SIM-SIM Failover / Failback
Dynamic IP, Static IP, PPPoE, PPTP, L2TP
Static IPv6, DHCPv6, PPPoEv6
LAN IP, Subnet Mask
AP Router, WDS only, WDS Hybrid Modes
WEP, WPA, WPA2, WPA-PSK, WPA2-PSK, 802.1x
Port-based, Tag-based
Third Party Providers: DynDNS.org (Dynamic/Custom), No-IP.com, TZO.com, and Dynamic DO!.jp (free/Charge)
Virtual Server/ Computer, DMZ Host
Pass-through: PPTP/ L2TP/IPSec
Static and Dynamic: RIPv1/v2, OSPF, BGP
Policy-based Bandwidth Control and Packet Flow Prioritization
VRRP
RFC2217, TCP Client, TCP Server, UDP
Modbus Slave
Modbus Gateway for Modbus TCP Master/Slave, Modbus RTU/ASCII Master/Slave Access
OPC UA Server, compliant to IEC 62541
Device Tag & Modbus Proxy Rules
MQTT Broker, Broker Bridge, MQTT Client
Sniffer, Off-line Proxy, Full-time Proxy, Sniffer & Proxy mixed modes
IPSec, OpenVPN, PPTP, L2TP, GRE
Tunneling with Full Tunnel, Tunnel Failover
Site to Site, Site to Host, Host to Site, Host to Host
SPI Firewall with Stealth Mode, IPS
Packet Filter, URL Blocking, and MAC Control
SMS, Data Usage, SIM PIN, USSD, Network Scan
Managing / Notifying Events, DO, SMS, Modbus, Syslog, SNMP Trap(v1 and v2c), Email Alert and Remote Host
Web, Telnet & SSH via the CLI, Command Script, TR-069, SNMP(v1/V2c/V3) & Private MIB
MMI, System Info., System Time / Log, Backup & Restore, Reboot & Reset
FTP Server, User Account
Packet Analyzer, Diagnostic Tools
Operating Temperature:-30° C ~ 70° C
Storage Temperature :-40° C ~ 85° C
Notes:
1.Specifications are subject to change without prior notice.
2.Supported cellular frequency depends on regional hardware version.
3.3G/4G and WiFi performance will be degraded if device’s ambient temperature is above 60°C.

  • 100Mpbs Copper
  • 1000Mbps Copper
  • 5-8 Ports
  • Din-rail
  • Wall-mounting

TAE3-72300-5100-T

Industrial Wireless IoT Gateway

Equipped 802.11n/ac 2T2R 5GHz, and 2.4G/5GHz selectable WiFi access point
Multiple (8) SSIDs for privilege group devices or users
4*GE LAN port with tag based and port based VLANs
RS232/RS485 interface for Modbus RTU/ASCII and various serial communication protocol
DI/DO for device triggering or event reporting
Equipped with multi-mode data logging function, which stores the collected logs on attached storage for SCADA telemetry
Support NAT, Routing, and IPv6.
Support VPN technologies, such as IPSec and OpenVPN, supporting up to 16 concurrent IPSec tunnels
Embedded with SPI firewall and IPS function, which prevents from cyber attacks
Support SNMP, Telnet & SSH via the CLI, and TR-069 for remote management
Seamless power failover between redundant DC 12V~48V wide range power input
11ac (5GHz) and 11n(2.4GHz) WiFi Uplink
1*RJ45 GE (Configurable)
4*RJ45 GE
802.11a/b/g/n/ac 2T2R (2.4G/5GHz selectable)
1*RS232/RS485 (4-pin Terminal Block)
1*DI (“Logic 0”: 0~2V, “Logic 1”: 5V~30V), 1*DO (Relay Mode, up to 30V / 1A)
1*USB 2.0
2*SMA Jack (M) for ext. WiFi Ant. (5GHz)
2*SMA Jack (M) for ext. WiFi Ant. (2.4G/5GHz
Multiple WANs, Load Balance, Configurable Ethernet
11ac 2T2R and 11n 2T2R WiFi Uplink
Dynamic IP, Static IP, PPPoE, PPTP, L2TP
Static IPv6, DHCPv6, PPPoEv6
LAN IP, Subnet Mask
AP Router, WDS only, WDS Hybrid Modes
WEP, WPA, WPA2, WPA-PSK, WPA2-PSK, 802.1x
Port-based, Tag-based
Virtual Server/ Computer, DMZ Host
Pass-through: PPTP/L2TP/IPSec
Static and Dynamic: RIPv1/v2, OSPF, and BGP
Policy-based Bandwidth Control and Packet Flow Prioritization
RFC2217, TCP Client, TCP Server, UDP
Modbus Gateway for Modbus TCP Master/Slave, Modbus RTU/ASCII Master/Slave Access
Sniffer, Off-line Proxy, Full-time Proxy, Sniffer & Proxy mixed modes
IPSec, OpenVPN, Tunneling with Full Tunnel, Tunnel Failover
Site to Site, Site to Host, Host to Site, Host to Host
SPI Firewall with Stealth Mode, IPS
MAC Control
Managing / Notifying Events; DO, SMS, Modbus, Syslog, SNMP Trap(v1/v2c), Email Alert, Remote Host, and MQTT
Web, Telnet & SSH via the CLI, SNMP(v1/v2c/v3) & Private MIB
MMI, System Info., System Time / Log, Backup & Restore, Reboot & Reset
FTP Server, User Account
Packet Analyzer, Diagnostic Tools
Operating Temperature:-30° C ~ 70° C
Storage Temperature:-40° C ~ 85° C
Notes:
1.Specifications are subject to change without prior notice.
2.Supported cellular frequency depends on regional hardware version.

  • 100Mpbs Copper
  • 1000Mbps Copper
  • 5-8 Ports
  • Din-rail
  • Wall-mounting
ITEMS PER PAGE
6
  • 6
  • 16
  • 30
  • 50
Compare
Compare
Selected* Maximum: 4
No products in the Compare.
Compare Now
Clear all

We use cookies to provide a better experience. By proceeding, you agree to our Privacy Policy, including the use of cookies and other tracking technologies.

I Accept