Product
| Standards | IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T IEEE 802.3z 1000BASE-X Gigabit Fiber IEEE 802.3ae 10 Gigabit Ethernet IEEE 802.3af/at Power over Ethernet IEEE 802.3bt PoE, 90W/port IEEE 802.1D STP (Spanning Tree Protocol) IEEE 802.3x Flow Control IEEE 802.1s MSTP(Multiple Spanning Tree Protocol) IEEE 802.1w RSTP(Rapid Spanning Tree Protocol) IEEE 802.1p QoS/CoS Protocol for Traffic Prioritization ITU-T G.8032 / Y.1344 ERPS v1/v2(Ethernet Ring Protection Switch) IEEE 802.1AB Link Layer Discovery Protocol (LLDP) IEEE 802.1Q Virtual Local Area Network (VLAN) IEEE 802.3x flow control, back pressure flow control IEEE 802.1X Network Authentication IEEE-802.1Q bridge MIB 2008 |
|---|---|
| Processing Type | Store and Forward |
| Flow Control | IEEE 802.3x flow control, back pressure flow control |
| Management | IPv4/IPv6, SNMP v1/v2c/v3, LLDP, LLDPMED, HTTP, HTTPS, SSHv2 telnet, DHCP Client, DHCPv6 Client, DHCP server, Port Mirror, DNS Client/Proxy, IP based Access Filter, ICMPv6, Syslog, Time Zone /Daylight Saving, NTP client, RMON, sFlow, Loop detection, DDMI, Modbus TCP, Console Port, USB configuration backup/restore, Power Lost Warning, Relay Trigger |
|---|---|
| Security | Port based 802.1X, Access Control List (ACL), MAC Based Authentication, VLAN assignment, QoS Assignment, Private VLAN, Guest VLAN, RADIUS Accounting, TACACS+, IP MAC binding, WEB/CLI Authentication, Authorization (15 levels), Port Security, ACLs for filtering/policing/port copy, IP source Guard, ARP Inspection |
| L2 Switching | Port/MAC/Protocol/IP Subnet Based VLAN, GARP/GVRP, Loop Guard, Link Aggregation Protocal (LACP), BPDU Guard, Error Disable Recovery, IGMP Snooping v2/v3, MLD Snooping v1/v2, IGMP Filtering, IPMC Throttling / Filtering Leave Proxy, DHCP snooping, G.8032 v1/v2, DHCP option82 |
| L3 Switching | static routes |
| QoS | 802.1p Queueing, Input Priority Mapping, Storm Control for Unicast/Multicast/Broadcast, Port/Queue/ACL Policer, Port Egress Shaper, Queue Egress Shaper, DiffServ (DSCP), Tag remarking, Scheduler mode |
| Network Redundancy | STP/RSTP/MSTP, ERPS v1/v2 (<50ms) |
| Configuration | Http, Https, Telnet, SSH, CLI, TFTP, SNMP v3 |
| PoE | PoE/PoE+/bt PoE, Power Budget Protection, PoE Output Scheduling, PoE Alive Check and Persistent PoE |
| System / Diagnostic | Dual Image Protection, PING/PING6 |
| SNMP MIBs & RFC Standards | RFC 2674 VLAN MIB
IEEE802.1Q bridge MIB 2008 RFC 2819 RMON (group 1, 2, 3, and 9) RFC 1213 MIB II RFC 1215 TRAPS RFC 4188 bridge RFC 4292 IP forwarding table RFC 4293 management information base for the Internet Protocol (IP) RFC 5519 multicast group membership discovery RFC 4668 RADIUS auth. client RFC 4670 RADIUS accounting RFC 3635 Ethernetlike RFC 2863 interface group MIB using SMI v2 RFC 3636 802.3 MAU RFC 4133 entity MIB v3 RFC 3411 SNMP management frameworks RFC 3414 userbased security model for SNMPv3 RFC 3415 viewbased access control model for SNMP RFC 2613 SMON – PortCopy IEEE 802.1 MSTP IEEE 802.1AB LLDPMIB (LLDP MIB included in a clause of the STD) IEEE 802.3ad (LACP MIB included in a clause of the STD) IEEE 802.1X (PAE MIB included in a clause of the STD) TIA 1057 LLDPMED ( MIB is part of the STD) RFC 3621 LLDPMED Power (PoE) (No specific MIB for PoE+ exists) |
| Back-Plane (Switch Fabric) | 104Gbps |
|---|---|
| Queues | 8 |
| Max. Number Of VLANs | 4095 |
| VLAN ID Range | VID 1 to 4095 |
| Memory Buffer | 32Mbits |
| Jumbo Frame | 9.6Kbytes |
| MAC Table Size | 32K |
| IGMP Group | 1024 |
| Transfer Rate | 14,880pps for Ethernet port
148,800pps for Fast Ethernet port 1,488,000pps for Gigabit Ethernet portt 14,880,000pps for 10 Gigabit Ethernet Port |
| Total Port Count | 16 |
|---|---|
| RJ45 Ports | 12*10/100/1000BASE-T with bt PoE-PSE (90W/Port) Auto-Negotiation, Full/Half Duplex, Auto-MDI/MDI-X |
| PoE Pin Out | V-, V-, V+, V+, for pin 1, 2, 3, 6; V+, V+, V-, V-, for pin 4, 5, 7, 8
*Support Modes: Mode A, Mode B, 4-Pair Mode |
| Fiber Port | 4*1G/2.5G/10GbE SFP+ slots |
| Wavelength | Depends on SFP modules |
| LED Indicators | System: Power 1, Power 2, Master (M), Ring (R), Status, PoE Load (P/L)
Ethernet ports: Speed/Link/Active PoE: On-connected to PD devices SFP: Link/Active |
| RS232 Serial Console | 1*RS232 in RJ45 connector with console cable,
baud rate 115,200bps,8,N,1 |
| Relay Contact | 24 VDC, 1A resistive |
| Input Voltage | Dual 48-55VDC redundant power inputs |
|---|---|
| Power Connection | 2 removable 4-contact terminal block |
| Overload Current Protection | Present (Slow-Blow Fuse) |
| Reverse Polarity Protection | Present |
| System Power Consumption | Max. 25W full loading |
| Max. PoE Power Budget | 360W |
| PoE Power Output | 30W max. per PoE port |
| Housing | Metal, IP30 protection |
|---|---|
| Dimensions | 72(W) x 160(H) x 130(D) mm |
| Mounting | DIN-Rail Mounting, Wall Mounting |
| Operating Temperature | STD: -10°C ~ 65°C (14°F ~ 149°F)
EOT: -40°C ~ 75°C (-40°F ~ 167°F) |
|---|---|
| Storage Temperature | -40°C ~ 85°C (-40°F ~ 185°F) |
| Ambient Relative Humidity | 5 to 95%, (non-condensing) |
| EMI | FCC Part 15 Subpart B Class A,
CE EN55032/EN61000-6-4 Class A |
|---|---|
| EMS | CE EN55035/EN61000-6-2 Class A:
IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8 (Magnetic Field) |
| Free Fall | IEC60068-2-32 |
| Shock | IEC60068-2-27 |
| Vibration | IEC60068-2-6 |
| Green | RoHS Compliant |
| MTBF (Telcordia SR-332, Issue 3, GB, 25oC) | 258,071 hrs. |
|---|
| Warranty | 5 Years |
|---|
We use cookies to provide a better experience. By proceeding, you agree to our Privacy Policy, including the use of cookies and other tracking technologies.
I Accept